Unfortunately, the roof over your head can be one of the biggest victims of poor craftsmanship. Most roofing companies will work hard to maintain the integrity of your home with proper roof installations while some others may do a rushed job that may result in a host of future problems. Incorrect roof installations can even damage the entire structure of the building. That’s why you need to take immediate steps to fix the issue when your roof has been installed incorrectly. Here are 7 ways to know your roof was installed incorrectly.
Your Roof Is Not Uniform
Symmetry is one of the most important signs of a properly installed roof. The shingles and shakes need to be evenly applied. They need to be aligned across all the angles of the roof. The shingles and shakes should match at all times. Improperly installed roofs may have shingles that are not evenly aligned or applied. In fact, the shingles on one side of the roof may not be evenly aligned to the shingles on the other side of the roof. Alignment inconsistencies can tell if your roof is improperly installed.
The Fasteners Are Improperly Applied
The type of fasteners used in a roofing project can make or break it. The roofer should use one type of nail and space the nails evenly. When fasteners are wrongly spaced or different types of fasteners are used, the roof won’t be stable for long. It can come apart in certain areas in a matter of months under such circumstances.
Missing Drip Edges
Drip edges are important when it comes to the drainage of water off the rooftop. The drip edges will prevent water from pooling on the roof when it rains. Failing to install drip edges will become quickly evident during rainy seasons. Water will get into the foundation of the roof along the edges and result in the growth of mold, rotting, and stains over time.
Missing Underlayment
Underlayment plays an important part in protecting your roof in the long run. When the underlayment is missing or deteriorated, leaks can occur. Underlayment acts as a barrier between the sheathing and the shingles to keep the water out. If you spot a leak within weeks of installing a new roof, it can be due to the missing underlayment.
Missing Shingles
If shingles are missing from an old roof, you know the roof is due for a replacement. But when shingles are missing from a newly installed roof, you should know you have an improper installation.
Improper Gutter Sloping
Some roofers may fail to fasten gutters to the sides of your home. They may not use the proper gutter spikes and screws and not slope the gutters properly for water drainage.
Flashing Mistakes
Flashing needs to be installed under the shingles in order to prevent water damage in the long run. Installing flashing over the shingles may compromise water resistance.
The aforementioned article provides information on 7 ways to know your roof was installed incorrectly. Always make sure you have a certified roofing contractor. Our Portland roofers ensure your roof is done the right way at a reasonable cost.